Concrete and Asphalt Blades
Concut offers a number of blade options for the cutting of cured concrete or asphalt with saws of 35 hp or less. For higher hp saws, please see our Pro Series blades.
WC Series
Wet Cutting Blades
These blades are designed for walk-behind saws from 5-25 hp. This is the blade of choice for the serious contractor or rental yard looking for excellent performance at a reasonable cost. Note: for 30HP saws and up, see our pro series.
| Application | Concrete (Wet cutting) |
| Blade Diameter | 12" to 24" |
| Blade Width | .125" /.250"/.375" |
| Segment Height | .350" |
| Bond Selection | Choose bond based on aggregate hardness, hp, and desired cutting speed. |
| Special Features | Custom diameters and thicknesses available. |
TB-DS
Wet/Dry Cutting Blades
These blades are for use with hand-held gas and electric saws. The segmented turbo design provides excellent cutting speed and life, even through reinforced concrete.
| Application | Concrete (Wet or dry cutting) |
| Blade Diameter | 12" to 20" |
| Blade Width | .125" /.145" in blades 16" and above |
| Segment Height | .395" |
| Special Features | Available with 1" or 20mm arbor |
TB-Paver
Wet/Dry Cutting Blades
This is the perfect blade to cut 10,000 psi concrete pavers, hard concrete, brick or stone. It will cut the pavers quietly and smoothly and still achieve excellent life.
| Application | Pavers, hard concrete, brick or stone (Wet or dry cutting) |
| Blade Diameter | 10" to 20" |
| Blade Width | .095"/.125" /.140" on 16" and above |
| Segment Height | .395" |
| Special Features | Available with DM-7/8"-5/8" arbor on 10" blade; 1" or 20mm arbor on larger blades |
T-SEG
Wet/Dry Cutting Blades
The turbo-segmented design combines the fast, smooth cutting of a turbo blade, with the long life of a segmented blade.
TSEG-20L This value-priced blade cuts a wide range of materials and offers good life.
TSEG-20 Used for the fast cutting of hard concrete, pavers and bricks, this blade has excellent life.
TSEG-30 This blade is a good choice for the smooth cutting of block and softer concrete. It may be run on a low hp walk-behind saw.
TSEG-GP15 This supreme blade has 15mm segments for superior life and fast cutting.
| Application | Concrete, brick, block or stone (Wet or dry cutting) |
| Blade Diameter | 12" to 16" |
| Blade Width | .125" |
| Segment Height | .395"/.590" |
| Special Features | Available with 1" or 20mm arbor |
DA Series
Dry Cutting Blades
These laser-welded blades will effectively cut softer, abrasive materials such as asphalt and green concrete. They should be used only on hand saws or walk-behind saws of 15 hp or less.
SDA: Standard blade provides fast cutting for the occasional user.
PDA: Premium blade combines good cutting speed and extra life.
DA: Supreme blade provides superior life and good cutting speed.
| Application | Asphalt (Wet or dry cutting) or Green Concrete |
| Blade Diameter | 12" to 18" |
| Blade Width | .110/.125" |
| Segment Height | .395"/.300" |
| Special Features | Available with 1" or 20mm arbor |
PDS Combo
Wet/Dry Cutting Blades
Deep core protection segments provide undercut protection for cutting asphalt quickly and easily, while the premium segment bond design allows for the cutting of concrete, brick and block.
| Application | Concrete/Asphalt (Wet or dry cutting) |
| Blade Diameter | 12” to 20” |
| Blade Width | .125"/.140" |
| Segment Height | .395" |
WA Series
Wet Cutting Blades
Asphalt blades are expected to achieve long life without core failure due to undercutting. All of Concut's WA series wet asphalt blades feature wedge segments for excellent undercut protection. The Wedge design also provides maximum cutting surface to increase life and reduce spalling in green concrete. This blade is the clear choice for the serious contractor and rental yards running walk-behind saws from 5-60 hp. For saws of 35 hp and up, also see our Pro Series blades.
| Application | Asphalt (Wet cutting) or Green Concrete |
| Blade Diameter | 12” to 20” |
| Blade Width | .125” /.155”/.250”/.310”/.375” |
| Segment Height | .350” |